Prefilter for Final Membrane Applications
Proprietary filter media produced by Pall for highly consistent performance
High contaminant-holding capacity
Wide chemical compatibility
Rigid polypropylene outer cage protects filter
All polypropylene one piece construction (except 0.2 micron)
Asymmetric polysulfone media used in 0.2 μm grade
Fast rinse-up to 18 Megohm-cm

Performance Specifications
Filter grades
0.2, 0.25, 0.45, 0.8, 2, 3, 5, 10, 30, 50, 100 μm

Recommended change-out differential pressure1
2.4 bard (35 psid)

Maximum forward differential pressure
4.8 bard (70 psid) @ 20°C (68°F)
2.8 bard (40 psid) @ 65°C (150°F)

Food and water contact use
Please contact Pall Corporation to verify that the product conforms to your national legislation and/or regional regulatory requirements for water and food contact use.

Cartridge rinse-up
Rinse-up to 18 Megohm-cm with a minimum of throughput

Purity
Cartridges are free of resins, binders, and adhesives.

Sterilization:
Multiple autoclaving for 30 minutes at 121°C (250°F) under no end load conditions. In -line steam sterilization is not recommended. May be in-line sanitized with hot water at 82°C (180°F) for 1 hour.